- Emergency Eyewashes and Showers
- Freeze Resistant
- Guardian GFR3110 Safety Station with Eye/Face Wash
GFR3110 Freeze-Resistant Safety Station with Eye/Face Wash, Bottom Inlet
Application: In areas where electricity is available, heat-traced safety stations provide excellent protection against freezing. Units are heated by self-limiting heat tracing cable wrapped around internal pipe. Thermostat regulates heating. Units are insulated and jacketed for protection against weather. Since units are intended for use in cold weather conditions, consideration should be given to supplying unit with tempered water in accordance with ANSI Z358.1-2004. See “Tempering Units” section for more information.
Shower Head: 10" diameter orange ABS plastic with 20 GPM flow control.
Shower Valve: 1" IPS brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod.
Spray Head Assembly: Two FS-Plus spray heads. Each spray head has a “flip top” dust cover, internal flow control and filter to remove impurities from water.
Eye/Face Wash Valve: 1/2" IPS brass three-way self-draining stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Valve has 1/2" NPT female drain port to permit water to drain from spray heads after use.
Jacket/Insulation: UV-resistant orange ABS plastic jacket with removable polyethylene foam insulation. Furnished with elastomeric seals for all seams and openings in jacket.
Heating Cable: Self-regulating heat tracing cable with external braid guards. Heating is controlled by thermostat that shuts heat off when ambient temperature is over 50°F. Cable is FM and CSA approved.
Electrical System: Unit is fully wired at the factory. Junction box and components are rated for Class 1, Division 2, Groups B, C and D. System requires a 120 VAC, single phase power supply.
Pipe & Fittings:Schedule 40 galvanized steel.
Supply: 1 1/4" NPT female bottom inlet.
Sign: Furnished with ANSI-compliant identification sign.
Quality Assurance: Unit is fully assembled and factory tested prior to shipment.
Note: This is not a Quick-Ship item and has a 4 to 6 week lead time. Units are shipped by freight only.