GFR1902 Freeze-Resistant Safety Station with Eye Wash, Plastic Shower Head
Application: Freeze-resistant combination eye wash and shower safety station. Freeze-resistant valves and supply lines are buried below frost line to protect against freezing. Units are designed to drain completely after use, so that no standing water remains in unit and possibility of freeze-up is eliminated. Since units are intended for use in cold weather conditions, consideration should be given to supplying unit with tempered water in accordance with ANSI Z358.1-2004. See “Tempering Units” section for more information.
Shower Head: 10” diameter. Shower head is orange ABS plastic.
Shower Valve: 1 1/4” IPS freeze-resistant valve with push plate. Valve body and supply line are buried below frost line to prevent freezing. Valve has 1/4” IPS bleed outlet to permit water standing in unit to drain out after use. Specify bury depth of valve when ordering.
Spray Head Assembly:Two GS-Plus spray heads. Each spray head has a “flip top” dust cover, internal flow control and filter to remove impurities from water.
Eye Wash Bowl:11 1/2” diameter stainless steel.
Eye Wash Valve:3/4” IPS freeze-resistant valve with push plate. Valve body and supply line are buried below frost line to prevent freezing. Valve has 1/4” IPS bleed outlet to permit water standing in unit to drain out after use. Specify bury depth of valve when ordering.
Pipe and Fittings:Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance.
Supply: 3/4” NPT (eye wash valve) and 1 1/4" NPT (shower valve) male inlets.
Waste: 1 1/4” NPT female outlet.
Sign: Furnished with ANSI-compliant identification sign.
Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.
Note: This is not a Quick-Ship item as it is manufactured to the customer's depth specification.
**THE UNIT WILL BE SHIPPED WITH A 3FT VALVE BURY DEPTH UNLESS SPECIFIED OTHERWISE**
Specifications